Wall Mounting Optical Fiber FDB Terminal Box
8 Port FTTH Distribution Box
Introduction
1. Application
This product integrates the function of splicing with splitting, suitabel for the straight through or branch connection, and terminal connection in optical system, as well as protection connection for cables and distribution pigtails. The cables can be spliced with indoor cables by splitting, to meet the requirement of traditional network.
2. Specification
a. High impact plastic,standard user interface
b. Suitable for 1x4, 1x8 PLC splitter
c. Anti-UV,shocking resistance
d. Wall mount
e. Unique middle panel≥180°,clear area for splicing and distribution, less cross-connection for cables
3. Techinical data
* Fiber bend radius:≥40mm
* Splice tray excess loss:≤0.01dB
* Temperature Range:-40℃C+60℃C
* Anti lateral pressure:≥2000N/10cm
* Shock resistance:≥20N.m
Specification
| Model No. | YG-FTB108S |
| Szie(mm) Long×Width×Height | 192*133*47 | Outer Packing(mm) Length×Width×Height | 480*470*520 |
| Material: | High quality ABS/PC | Net weight(Kg) | 0.3 |
| Suitable for optical cable diameter(mm) | ≤12F | Outer packing weight(Kg) | 19.5 |
| Fiber optic cable inlet / outlet number | 4/8 | Outer package quantity: | 60 |
| Maximum fusion core number | 8(core) | Outer package volume(M3 ) | 0.117 |
Operation manual
1.Install adapters
2. Strip and clean the cable, keep it 0.8~1.2m long and 30-50mm long of the strength member, and insert cable through inlet, fix it by cable clamp, and fix strength member by special clamp.
3 . Put the fiber to the tray , and let the end in the splicing slot after coiling.
4.Install PLC splitter in the tray,and connect pigtails with adapters,and put the pigtails in the splicing slot,splice with the incoming cables .(it can be used splicing only)
5.close the cover, plug outgoing pigtails through sealing rubber
6.Install the box with expansion screws, finish installation
Packing list
| Main body | 1set | manual | 1 |
| Heat shrink tube L=40mm 2pcs | 2pcs | 3x100 cable tie | 2pcs |
| M4x25 expansion screws | 4pcs | | |
Our Service
1. OEM Manufacturing welcome: Product, Package, etc.
2. Offer free sample for testing
3. Reply inquiry within 24 hours
4. After sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback. If you have any questions about the problem, contact with us, we will offer
the solve solution for you
Product Tags:
|
|
Indoor Multi Dwelling Unit (MDU) Network Interface Device (NID) 8 Port Mid-Span Fiber Distribution Box Images
|
